Home   | M2K Corporation | Contact Us | Site Map  
The Vehicle Communication & Measurement Module (VCMM®) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry leading one-box solution. The combining of this functionality will provide dealers with industry leading diagnostic capability at a significantly lower cost of ownership.

Key Features:
· Vehicle Communication (VCM II capability)
· Customer Flight Recorder capable
· 4-Channel Oscilloscope
· 4-Channel Digital Multi-meter
· 5th-Channel direct monitoring of the DLC connector
· Vibration Analysis
· Signal Generator

4/5 Channel Oscilloscope:
· Improved user interface from VMM
· Four independent differential Input Channels enables independent
  monitoring of signal types such as monitoring voltage while
  concurrently measuring voltage drop across the circuit.
· A Fifth High Speed Channel that can directly monitor CAN signals at
  the DLC connector
· Capture/Record capability to assist in capturing intermittent issues
· Advanced Triggering capability
· Pre-Configured setup configuration for common signals & procedures
· New “Time/Angle” time based settings (CKP/CMP timing diagnostics)

Vibration Analysis and Driveline Balance:
· Similar functionality to the MTS 4000/4100
· Improved user interface with reduced configuration and setup time
· Color display
· Record capacity

The Digital Multi-Meter:
· Monitor up to four independent readings at the same time
· Capture/Record history
· Graphing capability for up to two channels
· Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency and

Signal Generator:
· User configurable settings for signal waveform types: sine, square,
  triangle, pulse generator, DC voltage and arbitrary.
· Verify integrity of module input wiring and the module hardware
· Improved interface and greater adjustability of voltage and
VCMM Brochure