Home   | M2K Corporation | Contact Us | Site Map  

Combines Simple Operation with Superior Accuracy.
Automatic recovery/recharge by weight
Automatic vacuum by time
Automatic Air Purge – Eliminates damaging air without any monitoring of gauges or opening of valves.
Oil Drain – The display reminds you to drain the system oil captured during recovery. Calibrations on
the container clearly show you how much oil needs to be replaced.
Oil Inject – System prompts user to inject oil before charge. Reservoir provides visual reference on calibrated container.
Electronic Scale – The scale is mounted internally for protection, and has a dampening mechanism that protects
against impact shocks such as movement over rough surfaces. The scale weighs recovered refrigerant and
charges by weight for greatest accuracy.
Internal Storage Vessel – Refrigerant is recovered into and charged out of this vessel, which is permanently
mounted to the electronic scale for continuing reliability.
Internal Manifold – Block manifold contains solenoids that control refrigerant flow for easy operation, also
reducing the possibility of leaking connections.
Maintenance Prompts
• System prompts user to change vacuum pump oil when needed.
• System prompts user to change filter-drier when needed.
Ergonomic Design – The cabinet is easy to maneuver between service bays and position near the vehicle.
Gauges – The high and low side gauges are mounted at an angle that's easy to see.
Unit of Measure – Select pounds or kilograms through the menu.
Features that Speed Service
• 142 l/m vacuum pump for fast, thorough pull-down.
• Heavy-duty compressor pulls from both sides during recovery.
• Single pass recycling.
• Oil injector lets you add system oil in seconds.

English Manual