Home   | M2K Corporation | Contact Us | Site Map  
The most effective way to significantly increase performance of the Toyota 3RZ engine is by installing a turbo kit. This turbo kit has been specifically designed and engineered to balance power and driveability.

A common issue with the addition of a turbo kit is excessive heat. In order to combat this issue, this turbo kit uses a CNC machined steel manifold. This manifold has shown excellent longevity with minimal power loss compared to tubular headers.

The turbo itself is a Garrett T3/T4 turbo that provides an ideal balance of spool time and inlet air. The T4 inlet allows for large amounts of air to be brought into the turbo while the T3 side allows for a quick spool up. This low boost kit uses a TO4B S-trim with a stage 1 turbine wheel and a .48 A/R exhaust housing.

This kit is perfect for most daily driver or some race applications. The kit is designed to run from 5 lbs up to 15 lbs of boost. Mild boost settings can produce over 250 hp from the 3RZ engine.

One major issue to consider when boosting any engine is fuel management. The stock ECU was not designed to compensate for boost. This issue must be properly addressed to prevent engine damage or poor performance outputs which can be caused by improper tuning. One of the best ways to fix this issue is with a stand-alone or piggy-back ECU system. Contact M2K directly to find out information on stand-alone or piggyback engine management solutions.

Kit Contents:
· Garrett T3/T4 Turbo
· CNC Billet Steel Turbo Manifold
· Ceramic Coated Stainless Steel Downpipe
· Ceramic Coated "Hot Pipe"
· Silicone Couplers
· T-Bolt Clamps
· K&N Air Filter
· 38 mm Wastegate
· In-Cabin Boost Controller
· Oil Feed & Drain Lines w/all Necessary Fittings
· All Necessary Hardware, Gaskets and Fittings